Canonical: https://ai.allesclinx.com/metricon/dilution-calculator
Description: Calculate concentrate, water and dilution factor for a working solution using concentration or ratio-based dilution.

[Back to Metricon](<https://ai.allesclinx.com/metricon>)

# Dilution calculator

Turn a stock concentration or a concentrate-to-water ratio into the quantities needed for a final batch.

## Inputs

Calculation method

Stock concentration

Use the same concentration units and basis as the target.

Target concentration

Concentration of the final working solution.

Water parts per 1 part concentrate

parts

1:19 means one part concentrate plus nineteen parts water.

Final batch volume

L

Total final solution, including concentrate.

Concentrate required  **—**

## Method & assumptions

Calculation formula `C₁ × V₁ = C₂ × V₂ · Ratio mode: concentrate = final volume ÷ (1 + water parts)`

### Sources, assumptions & review

User input  **Values you provide**

Check units, basis and local values before relying on the output.

Calculated  **Transparent model output**

Metricon applies the displayed formula to the inputs on this page.

Assumption  **Model boundary**

Scenario inputs and defaults are not measured facts unless you supplied them from a controlled source.

Review  **Human decision**

Compare the result with approved product directions, actual operating conditions and accountable judgement.

**Before using the result**

For compatible liquid dilution only. Follow the product label and SDS for the approved concentration, contact time, PPE and handling procedure. Do not combine incompatible products.

## How it works

### Choose the dilution basis

Select stock-to-target concentration or concentrate-to-water ratio. Keep stock and target on the same concentration basis.

### Set the final batch

Enter the final volume in litres and the approved concentration or water parts. The batch includes concentrate.

### Read the quantities

Check Concentrate required, Approximate water / diluent and Dilution factor before preparing the batch.

### Check the approved method

Use the product label and SDS for concentration, compatibility and handling. Changing a ratio does not approve a method.

## Frequently asked questions

What does a 1:19 ratio mean?

One part concentrate plus nineteen parts water: twenty total parts of final solution. Enter 19 in Water parts.

Can the target exceed the stock?

No. Dilution cannot raise concentration; the calculator rejects a target above the stock concentration.

Is batch volume the water volume?

No. Final batch volume includes concentrate and diluent. The water result assumes approximate additive volumes.
